Cautions for replenishment of vending machines

When replenishing, vending machines need to be carefully positioned according to the specific characteristics of the goods, so that the vending machines can put the most goods, but also improve the shopping experience of consumers and reduce the loss of operators.

1. Different sizes of goods should be placed in different specifications of the slots. If you don't know where to put the goods, the most direct way is to put the goods in the spring slots to try. It is not too tight and will not fall off from the gap in the spring center, then it is appropriate.Because the entrance of the channel is fixed, but the entrance can be adjusted according to the length of the beverage to reduce stucking.

2. The carbonated drinks sold can be placed on the vending machine slots at a lower location. Otherwise, when the drinks fall down and the customers open the drinks, the drinks may erupt, which will not only increase the operator's loss, but also greatly affect the customer's purchase experience.

3. The process of putting in drinks should be put flat. The lids can be thrown to the left and right to reduce the stucking rate. The friction resistance of goods moving in the slots way is larger than that of plastic bottles, and the flat bottom track can effectively reduce the occurrence of stucking jam.

4. The vending machine with flat-bottomed slots should place low flat-bottomed goods as far as possible.

5. Quadrilateral packaged beverages must be placed smoothly in order to make the machine better conveyed, without affecting the normal operation.

6. The same spring slots should be filled with the same kind of commodity, so as to reduce the trouble of frequent replenishment.