You need to know about vending machine maintenance...

Vending machine maintenance method

In daily life, people can't avoid various problems when using vending machines. For example, card currency, card goods and other problems plaguing users, affecting both normal business and customer buying mood... So today Aifeng will provide you with some vending machine maintenance methods, so that everyone can operate the vending machine more properly.

So what maintenance should the vending machine pay attention to every day?

One: maintenance tools

Towel, condenser cleaning brush, Phillips screwdriver, water or neutral lotion, high power blower or vacuum cleaner

Two: maintenance required parts

Troubleshoot the surface of the machine body, the pick-up port, the window display, the paper coin identifier, the shipping chute, the condenser, the evaporating dish, and the remote control.

Three: maintenance step A, vending machine body

Vending machines include: beverage machines, general machines, convenience cabinets, etc.

1. When the machine is dusty, wipe it with a dry towel.

2. If the dirt is serious, use a towel dampened with warm water or diluted neutral wash to clean.

3, for the machine with a display, when there are stains on the screen, you need to wipe with a dry towel, if the stain is serious, you need to wipe the key stain with a wet towel or a wet towel with diluted neutral detergent, remember that the towel can not be Too moist, the purpose is to wipe off the stains.

4. Do not use acidic solvents or alkaline solvents. Otherwise, the parts such as the window panel and the selection button may be cracked by corrosion or the paint of the body may fade. When removing dirt from vending machines, it is prohibited to use chemicals such as paint solvents and banana water.

〉

B, pick up port cleaning

Refers to the pick-up port of machines such as beverage machines, general machines, convenience cabinets, etc.

The pick-up port needs to check whether there are any stains in each replenishment: in the summer, the position of the beverage machine to pick up the hot and cold alternately is easy to breed bacteria, and the led cabinet has led lighting to attract flying insects; in both cases, it is easy to have condensed water. Fog and flying insects need to be cleaned with a towel every time they replenish.

〉

C, the cleaning of the window

Since the exhibition window is the location for displaying the sample, it needs to be kept clean at all times. Because there are lights in the exhibition window, it will attract flying insects. It needs to be kept clean and bright. It can be cleaned with a wet towel. Every replenishment needs to be viewed and cleaned up at any time. .

〉

D, the cleanup of the recognizer

The identifier includes: a banknote and a coin dispenser, which are means for receiving cash.

1. In the process of receiving cash, the conveying passage of the banknote device and the identification channel of the coin device may be dirty, and the identification head of the identifier may be opened to see the dirt;

2, you need to use a wet towel or a wet towel with a neutral detergent to clean the stains, otherwise it will directly affect the currency acceptance rate of the recognizer, each time you replenish the coin or collect cash need to check and clean up!

〉

E. Cleaning of the shipping chute

Shipping chutes are the only way to ship beverages and food.

1. In the case of a broken beverage, the beverage with syrup will directly cause stains on the shipping chute, and you can view it by opening the inner door.

2, it will dry up if it is not cleaned for a long time, it needs to be cleaned with a wet towel. Every replenishment needs to be viewed.

〉

F, condenser cleaning

At least once a month, use a vacuum cleaner and a condenser cleaning brush to remove any dirt or dirt attached to the heat sink of the condenser. If it is not cleaned for a long time, it will result in poor cooling performance, power consumption, and serious compressor failure!

Note: Use a hard brush other than metal (such as a condenser cleaning brush) to move it up and down. You can also use a vacuum cleaner to suck it out. Otherwise, it will affect the refrigeration of the machine. If it is dirty, it needs to be disassembled for deep cleaning.

〉

G, cleaning of the evaporating dish

The evaporating dish is where the excess condensate is stored and will evaporate through the copper tube of the condenser.

1. If the water overflows if the evaporation is not complete, remove the baffle of the evaporating dish with a screwdriver, and take out the evaporating dish to dump the condensate in the evaporating dish.

2. Clean up at least once every two months. The amount of condensate produced is related to the ambient temperature of the machine and is proportional to the ambient temperature.

* The above is the maintenance operation of the vending machine. The well-maintained vending machine can last longer and earn more wealth for the operating friends!

If a vending machine is not used for a long time, how should it be maintained?

Vending machines need to be well maintained during operation, and should be carefully maintained when not in use for a long time.

When a vending machine is not used for a long time, it should be locked

Do not leave the vending machine door open.

First, take out all the items placed inside.

Next, set the switch of the leakage protector to OFF and unplug the power plug.

Wipe the inside and outside of the vending machine again.

Finally, cover the vending machine with a protective cover and so on.

We all know that any product will have a shelf life.

When the shelf life expires, it may face deterioration or damage;

In real life

Often when we are using a commodity

I haven't waited for the shelf life, this product is broken.

......

In addition to the quality problems of the product itself

In fact, it is closely related to the habits in our daily life.

Take the Afen vending machine as an example. The performance and service life of the vending machine is directly related to daily maintenance. More and more examples show that scientific use of sales opportunities can extend their service life and reduce unnecessary Maintenance costs. After reading the above maintenance methods of the vending machine, I believe that it will help you to operate the vending machine in the future!